All Available components
Linear Bearing
Mechanical • Bearing

LM8UU 8 MM Linear Motion Bearing

Available Quantity : 11
Package :

Bearing LM8UU
Motor pulley 20 Teeth 10mm belt GT2 timing pulley 6.35mmbore
Mechanical • pulleys

Motor pulley 20 Teeth 10mm belt GT2 timing pulley 6.35mmbore

Available Quantity : 10
Package :

pulleys gt2
Brass Heat-Set Knurled Inserts for Plastic M3 X 4mm
Mechanical • Bearing

Instead of screwing into plastic, we recommend strong and reusable machine screws and heat-set inserts. Heat set inserts are only reasonably priced and have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work fabulously for 3D printed plastic as well. You could use a plain soldering iron to try to heat-press these in - Heat up the iron and use it to press the insert in, wait for it to cool, then use like a hex nut that's embedded inside the plastic. https://thinkrobotics.com/products/brass-heat-set-inserts-for-plastic?variant=39635373686870

Available Quantity : 787
Package : M3

M3 Inserts Brass Heat-Set Knurled Inserts for Plastic threded Inserts
Brass Heat-Set Knurled Inserts for Plastic M4 X 4mm
Mechanical • pulleys

Instead of screwing into plastic, we recommend strong and reusable machine screws and heat-set inserts. Heat set inserts are only reasonably priced and have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work fabulously for 3D printed plastic as well. You could use a plain soldering iron to try to heat-press these in - Heat up the iron and use it to press the insert in, wait for it to cool, then use like a hex nut that's embedded inside the plastic. https://thinkrobotics.com/products/brass-heat-set-inserts-for-plastic?variant=39635373686870

Available Quantity : 67
Package : M4

Brass Heat-Set Knurled Inserts for Plastic threded Inserts M4 Inserts
625ZZ Radial Bearing (5x16x5) Metal Shield
Mechanical • Bearing

625ZZ Radial Bearing (5x16x5) Metal Shield https://www.fastdep.in/product/bearing-625zz/

Available Quantity : 301
Package :

625
GT2 Idler Pulley - toothless 4mm ID (4.9mm)
Mechanical • pulleys

his GT2 timing pully has 20 teeth and is designed to be an idler in a belt system. Unlike a standard GT2 pulley, this one has a set of bearings pressed into the center bore. The bearings have a center bore of 5mm and allow the pulley to spin freely on a stationary shaft or bolt. The pully is designed to work with all forms of 6mm and 10mm wide GT2 belt and Steel Core GT2 Belts we carry in stock. https://thinkrobotics.com/products/gt2-idler-pulley-1pc?variant=39636422426710

Available Quantity : 4
Package : GT2

gt2 GT2 10MM