All Available components
SeeedStudio XIAO RP2350 – Raspberry Pi RP2350
Electronics • Dev board

The SeeedStudio XIAO RP2040 is a tiny, high-performance microcontroller development board based on the Raspberry Pi RP2040 chip. Designed for makers and developers, it features a dual-core Arm Cortex-M0+ processor, 2MB of onboard flash storage, and 19 multifunction GPIO pins, offering versatility for a wide range of applications. Preloaded with MicroPython support, it simplifies programming for beginners and professionals alike. With its small form factor (21mm x 17.5mm), onboard RGB LED for status indication, and USB-C connectivity, the XIAO RP2040 is ideal for wearable devices, IoT projects, robotics, and compact embedded systems. Its low power consumption and robust capabilities make it a go-to choice for innovative, space-constrained designs. Features: Powerful MCU Board: Equipped with a Raspberry Pi RP2350 chip featuring dual-core, dual-architecture capability, allowing developers to switch between the dual industry-standard Arm Cortex-M33 cores @ 150MHz with FPU, and a pair of open-hardware Hazard3 RISC‑V cores Enhanced Security Features: Built-in secure boot and encrypted bootloader ensure application security. Software Support: Compatible with C/C++ and MicroPython, ensuring easy project development and prototyping. Rich Onboard Resources: Integrates an RGB LED, 2MB Flash, 520kB SRAM, and 19 multifunction GPIOs(Analog, Digital, I²C, UART, SPI, PWM). Expanded 8 New IOs: Compared to previous XIAO MCUs, the addition of 8 IO pins on the back supports more complex applications. Efficient Power Design: Ultra-low power consumption of just 27μA in sleep mode, enabling battery power supply. Direct battery voltage measurement via internal IO enhances the battery management system (BMS). Compact Thumb-Sized Design: Measuring 21 x 17.8mm, adopting Seeed Studio’s classic XIAO form factor, ideal for space-conscious applications. Production-friendly: Surface Mount Device (SMD) design with all components on the front and stamp holes on both sides, facilitating efficient mass production. Application: Smart Control Human Interface Devices (HID, such as mouse, DIY Mechanical Keyboard, joystick, console) Education Robotics Wearables https://robu.in/product/seeedstudio-xiao-rp2350-raspberry-pi-rp2350/

Available Quantity : 2
Package : Xiao

Xiao XIAO ESP32C6 ESP 32 C6 ESP 32
Raspberry Pi Pico 2
Electronics • Dev board

https://robu.in/product/raspberry-pi-pico-2/?gQT=2

Available Quantity : 4
Package : SMD-DIP

RP2040 Raspberry Pi Pico2 Pico 2
ATTINY3216-SNR
Electronics • Integrated circuit

AVR tinyAVR™ 1, Functional Safety (FuSa) Microcontroller IC 8-Bit 20MHz 32KB (32K x 8) FLASH 20-SOIC https://www.digikey.in/en/products/detail/microchip-technology/ATTINY3216-SNR/9477801

Available Quantity : 88
Package : 20-SOIC

t3216 3216 Attiny3216
2 pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry
Electronics • Pins & Connector

2 pin PH Right Angle SMD Male Connector 2mm Pitch This is PH Connector with 2mm pitch in SMD Right Angle formation having 2 pins. PH-2.0 2P connector having 100VAC/VDC capabilities with 2A of current. The actual part number of this is S2B-PH-SM4 Features of PH Male Connector Plug Type: 2mm Wire to Board – 2P 3A (at #24 AWG) 100 VAC/VDC 2 mm pitch Package Contains – 1x 2mm PH Connector 2 Pin https://punoscho.in/product/2-pin-ph-right-angle-smd-male-connector-2mm-pitch/

Available Quantity : 93
Package : 2 mm

1x2 JST Horizontal JST SMD JST SMT
3 pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry
Electronics • Charging module

3 pin PH Right Angle SMD Male Connector 2mm Pitch This is PH Connector with 2mm pitch in SMD Right Angle formation having 3 pins. JST PH-2.0 3P connector having 100VAC/VDC capabilities with 2A of current. The actual part number of this is S3B-PH-SM4 Features of PH2.0 Male Connector Plug Type: 2mm Wire to Board – 3P 3A (at #24 AWG) 100 VAC/VDC 2 mm pitch Package Contains – 1x 2mm PH Connector 3 Pin https://punoscho.in/product/3-pin-ph-right-angle-smd-male-connector-2mm-pitch/

Available Quantity : 100
Package : 2 mm

Horizontal JST SMD JST SMT
1×40 Pin Female Single Row SMT Header Strip – 2.54mm Pitch
Electronics • Pins & Connector

1×40 Pin Female Single Row SMT Header Strip – 2.54mm Pitch 2.54 mm 1×40 Pin Female Single Row SMT Header StripIt has two rows of 40 pins each. Ideal for surface mounting, where space is a constraint. Tags, 1×40 Pin Berg Strip, 40Pin one Row Berg Strip, 40X1 Berg Strip, 40×1 Berg Strip 2.54mm Pich. Features/Specs: Connector: Header Strip Gender: Female Mounting Type: SMD/SMT Pin Spacing: 2.54 mm Contact Material: Phosphor Bronze Contact Resistance: 20mΩ Insulation Material: PBT UL 94V-0 Insulation Resistance (MΩ): ≥1000 Length: 102mm Width: 2mm Height: 9mm Weight: 3gm https://sharvielectronics.com/product/1x40-pin-female-single-row-smt-header-strip-2-54mm-pitch/

Available Quantity : 648
Package : 2.54

vertical 2.54 mm break anyway
Tactile Switch 2Pin Rectangle Button Red Stem SPST SMD TS3625A-HT
Electronics • Switches

specification: Switch Width: 3.65mm Switch Height: 2.5mm Actuator Style: Rectangle button Contact Current: 50mA Mounting Style: Brick nogging Switch Length: 6.1mm Circuit: SPST Operating Force: 250gf@±30gf Voltage Rating (DC): 36V Application: TACTILE SWITCH (MECHANICAL CONTACT) Package Includes: 1 X TS3625A-HT 50mA Brick nogging SPST 250gf@±30gf 36V SMD,3.7x6.1mm Tactile Switches https://probots.co.in/ts3625a-ht-50ma-brick-nogging-spst-250gfat-30gf-36v-smd-3-7x6-1mm-tactile-switches.html

Available Quantity : 20
Package : 2pin SPDT

Push Button 2 pin spst
FR1 Copper Clad - Double Sided( 2x3") 75x50 mm
Electronics • Copper Clad Boards and PCBs

This copper clad material is ideal for quick prototyping of PCBs on the Nomad using Carbide Copper. It's made of FR1, instead of the more common FR4, for longer cutter life.

Available Quantity : 75
Package : DS

PCB Double Sideded DS
MP1584 Buck converter module
Electronics • Power Modules

The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices.

Available Quantity : 2
Package :

MP1584 DC-DC Buck converter
Resettable Fuse
Electronics • Dev board

Resettable Fuse, Surface Mount, 5 A, Fast Acting, 32 VDC, SMD

Available Quantity : 10
Package :

Fuse
Resistor 180ohm
Electronics • Resistor

Res Thick Film 1206 180 Ohm 5% 0.25W(1/4W)

Available Quantity : 8
Package : 1206

resistor 180ohm
10k Ohm 8 Resistor Network
Electronics • Resistor

10k Ohm 8 Pin 4 Resistor Network

Available Quantity : 10
Package :

resistor 10K
SWITCH TACTILE SPST-THROUH HOLE
Electronics • Switches

Tactile Push Button Switch 6x6x5 mm

Available Quantity : 20
Package :

Push Button Switch
Ferrite Bead
Electronics • Ferrite Bead

Ferrite Bead 75 Ohms @ 100Mhz – 3A – SMD 1206

Available Quantity : 10
Package : 1206

Ferrite Bead
Dual N Channel Power MOSFET
Electronics • Mosfets and Transistors

2 N Channel Power MOSFETs, Package Type: SOT23-6

Available Quantity : 10
Package : SOT23-6

N Channel MOSFET SOT23-6