LED RGB CLEAR 4PLCC SMD
Electronics • LED

Red, Green, Blue (RGB) 621nm Red, 528nm Green, 470nm Blue LED Indication - Discrete 2.1V Red, 3.2V Green, 3.2V Blue 4-SMD, J-Lead

Available Quantity : 227
Package : PLCC4

PLCC4 RGB LED

CONN HDR 2POS 0.1 TIN SMD
Electronics • Pins & Connector

2 Position Header, Top or Bottom Entry Connector 0.100" (2.54mm) Surface Mount Tin https://www.digikey.in/en/products/detail/sullins-connector-solutions/NPTC021KFXC-RC/776052

Available Quantity : 50
Package : 2.54mm

vertical SMD 1x02

MPU-6050 3-Axis Accelerometer and Gyro Sensor
Electronics • Sensors

The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms.

Available Quantity : 4
Package :

IMU Magnetometer & Gyroscope Accelerometer

WS2812B Mini RGB SMD LED – SMD3535 – 4 pin
Electronics • Sensors

WS2812B Mini RGB SMD LED is an intelligent control LED light source that the control circuit and RGB chip integrated in a package of 3535 component. Its’ internals include intelligent digital port data latch and signal reshaping amplification drive circuit. It also includes a high-precision internal oscillator and a programmable constant current control part to ensure high color consistency. The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal reduces by 24bit. The pixels adopt auto reshaping transmit technology, making the pixel cascade number not limited to the signal transmission, and only makes it dependent on the speed. https://www.ktron.in/product/ws2812b-mini-smd-3535-4-pin/

Available Quantity : 174
Package : SMD3535

smd LED neopixel led Addressable LED neopixel

WS2812B RGB Smd 5050 Led
Electronics • LED

WS2812B RGB Smd 5050 Led is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part, effectively ensuring the pixel point light color height consistent. https://www.ktron.in/product/ws2812b-rgb-smd-5050-led/

Available Quantity : 183
Package : 5050

smd LED neopixel led Addressable LED 5050 Addressable

Uno Arduino Development Board
Electronics • Dev board

The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip. We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without CH340 chip.

Available Quantity : 5
Package :

board Development

Triple Axis Accelerometer Module
Electronics • Sensors

This ADXL345 Triple axis accelerometer module is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface.

Available Quantity : 5
Package :

sensor module

INMP441 MEMS High Precision Omnidirectional Microphone Module
Electronics • Sensors

The INMP441 is a high-performance, low-power, digital output, omnidirectional MEMS microphone with a bottom port. The complete INMP441 solution consists of a MEMS sensor, signal conditioning, analog to digital converter, anti-aliasing filter, power management, and industry-standard 24-bit I2S interface. The I2S interface allows the INMP441 to be directly connected to digital processors such as DSPs and microcontrollers without the need for an audio codec for use in the system. The INMP441 has a high signal-to-noise ratio and is an excellent choice for near-field applications. The INMP441 has a flat wideband frequency response that results in a high definition of natural sound.

Available Quantity : 4
Package :

sensor module

Hall-Effect Magnetic Position Sensor
Electronics • Sensors

The MT8111ET - Hall-Effect Magnetic Position Sensor Unipolar 110Gs 3Pin SOT-23 (Thin) is produced by BCD technology with both high performance and high reliability. The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator for operation with supply voltage of 2.8V to 24V, a smallsignal amplifier, Hall sensors with dynamic offset cancellation, a schmitt trigger and an open-drain output with over-current protection. It features temperature compensation technique to make the magnetic switching points stable over a wide temperature range.

Available Quantity : 6
Package :

smd sensor

Pressure sensor
Electronics • Sensors

Pressure Sensor 5.37PSI (37kPa) Vented Gauge Male - 0.1" (2.59mm) Tube 0 mV ~ 31 mV 6-SMD Module

Available Quantity : 5
Package :

sensor module

DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Electronics • Motor_Drivers

The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent, and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). Img 0849 Note: We are supplying two DRV8825 Drivers as DRV8825 Stepper Motor Driver with Aluminum Heat Sink- Good Quality and DRV8825 Stepper Motor Driver with Aluminum Heat Sink- Normal Quality. The difference between them is, the good quality DRV8825 has more number of PCB layers and it features the connecting pins which are of gold plated as compared to other. (refer to above image) Using the Driver Wiring Diagram For Drv8825 Stepper Motor Driver Features : Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB Package Includes : 1 x DRV8825 Stepper Motor Driver with Aluminum Heat Sink- Good Quality. https://robu.in/product/drv8825-stepper-motor-driver-aluminum-heat-sink-good-quality/

Available Quantity : 12
Package : soldered module

motor Driver Stepper Driver drv8825

MOSFET N-CH 30V 1.7A SOT-323
Electronics • Mosfets and Transistors

N-Channel 30 V 1.7A (Ta) 350mW (Ta) Surface Mount SC-70-3 https://www.digikey.in/en/products/detail/alpha-omega-semiconductor-inc/AO7400/1855856

Available Quantity : 82
Package : SC-70, SOT-323

N MOS N Channel MOSFET 1.7 A

Electrolytic Capacitor
Electronics • Capacitor

It is a 100uF 50V SMD Electrolytic Capacitor or Surface Mount chip Aluminum Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode. It has a diameter of 8 mm with height of 10.5mm.

Available Quantity : 14
Package :

capacitor smd

CONN HDR 4POS 0.1 TIN SMD
Electronics • Pins & Connector

4 Position Header, Top or Bottom Entry Connector 0.100" (2.54mm) Surface Mount Tin https://www.digikey.in/en/products/detail/sullins-connector-solutions/NPTC041KFXC-RC/776054

Available Quantity : 16
Package : 2.54 mm SMD

smd socket 2.54 mm socket 1x04 sddf

0.96 inch Yellow-Blue OLED Display Module
Electronics • Displays and LCDs

Features For OLED-SSD1306, a more elaborate and beautiful screen than LCD, with more functions High contrast, thus supporting clear display With no need of backlight Working voltage: 2.7V - 5.5V; PCB size: 2.8 x 3.2cm Standard double-sided printed circuit board, 1.16mm thick, with an elegant layout, 3 mm holes at two corners for easy fixing Low power consumption: 0.04W during normal operation

Available Quantity : 7
Package : soldered module

OLED Display OLED-SSD1306