This copper clad material is ideal for quick prototyping of PCBs on the Nomad using Carbide Copper. It's made of FR1, instead of the more common FR4, for longer cutter life.

Available Quantity : 79
Package : DS

The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices.

Available Quantity : 3
Package :

Resettable Fuse, Surface Mount, 5 A, Fast Acting, 32 VDC, SMD

Available Quantity : 10
Package :

Res Thick Film 1206 180 Ohm 5% 0.25W(1/4W)

Available Quantity : 8
Package : 1206

10k Ohm 8 Pin 4 Resistor Network

Available Quantity : 10
Package :

Tactile Push Button Switch 6x6x5 mm

Available Quantity : 20
Package :

Ferrite Bead 75 Ohms @ 100Mhz – 3A – SMD 1206

Available Quantity : 10
Package : 1206

2 N Channel Power MOSFETs, Package Type: SOT23-6

Available Quantity : 10
Package : SOT23-6

10K Ohms 3296 Multiturn Trimpot Potentiometer or trimmer is simply a device containing a resistive element, and a wiper, or adjustable tap, contacting the element. The wiper can be mechanically moved to vary the amount of voltage or resistance in the circuit. The Resistive Element Trimmers for commercial applications typically have a resistive element made of carbon or cermet (a combination of Ceramic and Metals), or of resistance wire wound on an insulated copper mandrel. Pitch: 2.54mm

Available Quantity : 5
Package : Pitch 2.54mm

0.25W 5% Through Hole

Available Quantity : 50
Package :

0.25W Through Hole

Available Quantity : 50
Package : Throgh Hole

2.54mm Pitch

Available Quantity : 10
Package : Pitch 2.54mm

63V 100uF , Electrolytic Capacitor – 8 x 12.5 mm –Through Hole -- Keltron

Available Quantity : 6
Package : Through Hole

ULN2803 Darlington Transistor Array SMD IC is an Darlington Transistors Arrays Series are high−voltage, high−current Darlington drivers comprised of eight NPN Darlington pairs. Furthermore all units feature integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and display (LED) drivers. This IC does not integrate protection circuits such as overcurrent and overvoltage protectors. Thus, excess current or voltage may damage the IC. Please design the IC so that excess current or voltage will not be applied to the IC. Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding.

Available Quantity : 10
Package : SOL18

25V 1000uF, 10 x 21 mm

Available Quantity : 3
Package : Through Hole