Instead of screwing into plastic, we recommend strong and reusable machine screws and heat-set inserts. Heat set inserts are only reasonably priced and have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work fabulously for 3D printed plastic as well. You could use a plain soldering iron to try to heat-press these in - Heat up the iron and use it to press the insert in, wait for it to cool, then use like a hex nut that's embedded inside the plastic. https://thinkrobotics.com/products/brass-heat-set-inserts-for-plastic?variant=39635373686870

Available Quantity : 67
Package : M4

625ZZ Radial Bearing (5x16x5) Metal Shield https://www.fastdep.in/product/bearing-625zz/

Available Quantity : 301
Package :

his GT2 timing pully has 20 teeth and is designed to be an idler in a belt system. Unlike a standard GT2 pulley, this one has a set of bearings pressed into the center bore. The bearings have a center bore of 5mm and allow the pulley to spin freely on a stationary shaft or bolt. The pully is designed to work with all forms of 6mm and 10mm wide GT2 belt and Steel Core GT2 Belts we carry in stock. https://thinkrobotics.com/products/gt2-idler-pulley-1pc?variant=39636422426710

Available Quantity : 4
Package : GT2

The XIAO RA4M1 integrates Renesas' RA4M1 chip (32-bit ARM® Cortex®-M4 MCU up to 48 MHz with FPU) into the classic XIAO form factor. This development board offers 256KB Flash, 32KB SRAM, 8KB EEPROM, a USB 2.0 connector, reset and boot buttons, 3 LEDs, a 14-bit A/D converter, a 12-bit D/A converter, and a CAN BUS interface. With onboard charging circuitry and low-power modes (as low as 45μA), it’s ideal for battery-powered applications. Sharing the same 32-bit microcontroller as the Arduino Uno R4, it's natively compatible with Arduino IDE, making it the perfect starting point for electronics projects thanks to the extensive XIAO accessories. https://www.google.com/url?q=https://robu.in/product/seeedstudio-xiao-ra4m1-smallest-dev-board-based-on-32-bit-renesas-ra4m1-arduino-ide-ready/&opi=95576897&sa=U&ved=0ahUKEwi9yvj_-9mMAxV3n2MGHc0xMRgQ1ykIPw&usg=AOvVaw1qB-O_WjuCbOBbCqrm_1Rm

Available Quantity : 1
Package : Xiao

S8050 Small Signal NPN Transistor Transistor Polarity: NPN Collector- Emitter Voltage VCEO Max: 25 V Collector- Base Voltage VCBO: 40 V Emitter- Base Voltage VEBO: 5 V Package/Case: SOT-23-3

Available Quantity : 56
Package : SOT-23-3

Max Continuous Voltage AC: 275V AC Max. Vm: 300V Max Clamping Voltage: 710V

Available Quantity : 5
Package : Through Hole

Capacitance Value: 22uF Capacitance Tolerance: ±20% Rated Voltage: 16V

Available Quantity : 9
Package : 1206

360 Degree Rotary Encoder Brick Sensor Module

Available Quantity : 4
Package : Through Hole

Power Dissipation: 500mW Storage Temperature Range: -65 to 175°C Maximum Junction Operating Temperature: + 200 °C Surge Power: 30 W

Available Quantity : 20
Package : Through Hole

DC-DC Buck Converter Step Down Module LM2596 Power Supply is a step-down(buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 series operates at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators.

Available Quantity : 5
Package :

Manufacturer: Slkor(SLKORMICRO Elec.) Package: SOT-23 Drain Source Voltage (Vdss): 50V Continuous Drain Current (Id): 220mA Drain Source On Resistance (RDS(on)@Vgs,Id): 3.5Ω@10V,220mA Power Dissipation (Pd): 225mW Gate Threshold Voltage (Vgs(th)@Id): 1.6V@1mA Type: 1 N-channel Input Capacitance (Ciss@Vds): 50pF@25V Operating Temperature: -55℃~+150℃ https://robu.in/product/bss138-slkor-50v-220ma-3-5%cf%8910v220ma-225mw-1-6v1ma-1-n-channel-sot-23-mosfets-rohs/

Available Quantity : 36
Package : SOT-23

Fuse 6A 250V Glass 5X20mm

Available Quantity : 5
Package :

This 3x4x2mm SMD Tactile Switch is widely used as a standard input “buttons” on electronic projects. This switch uses surface mount technology. Hence, it can be used where space is limited. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed and complete the circuit. Applications include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation, and computer/peripherals.

Available Quantity : 8
Package :

Mini 360 Step-Down Buck Converter Power Module use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient. This Module can be use as a DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply, various right size and weight for demanding applications such as aviation models, etc.

Available Quantity : 4
Package :

SMA (DO214-AC) Package. This is SS34 3A 40V Schottky Diode. This is a SMD version of 1N5822. It has current rating of 3A, with max repetitive voltage of 40V.

Available Quantity : 28
Package :